Products at Trace Heating Products UK https://traceheatingproducts.co.uk/products/ Supplier of Chromalox Trace Heating Products Sat, 16 Mar 2024 12:52:33 +0000 en-GB hourly 1 https://wordpress.org/?v=6.8.3 https://traceheatingproducts.co.uk/wp-content/uploads/2020/03/Favicon-150x150.png Products at Trace Heating Products UK https://traceheatingproducts.co.uk/products/ 32 32 IBC Flexible Heating Jacket https://traceheatingproducts.co.uk/product/ibc-flexible-heating-jacket/ Tue, 24 Jan 2023 09:03:52 +0000 https://traceheatingproducts.co.uk/?post_type=product&p=944 Flexible Heating Jackets wrap around the tank, clip together and the thermostat can be set to the required temperature.

IBC Covers are designed to insulate and maintain the temperature inside an intermediate bulk container or to control the contents temperature on a standard pallet. Our heaters are equipped with a surplus of safety through redundant sensors inside each heating circuit. The long-lasting temperature controller can be reused, if the heater itself will be damaged.

IBC Heater Jackets offer al solution for quickly and effectively heating up fluids and make them easy to empty from a container with little to no waste. They are used throughout various industries to heat up and lower the viscosity (thickness) of many different types of industrial fluids including; resin, cooking fats and oils, chocolate

The post IBC Flexible Heating Jacket appeared first on THPUK.

]]>
  • Robust Heating Jacket with two sensors per heating zone for increased operating safety 
  • Electronic temperature controller/-monitor (removable) for plug & play
  • For heating and tempering up to 90 °C
  • Energy-efficient operation due to very good heat transfer and good thermal     insulation
  • Robust due to high-quality materials (silicone-free) and workmanship
  • Mounting system for permanently tight fit and one-person handling
  • Front-mounted controls for ideal operation

    • The post IBC Flexible Heating Jacket appeared first on THPUK.

    ]]>         Winkler Base Drum https://traceheatingproducts.co.uk/product/winkler-base-drum/ Mon, 23 Jan 2023 09:48:30 +0000 https://traceheatingproducts.co.uk/?post_type=product&p=934 Base Drum Heater up to 150 °C  - 

    These base drum heaters are ideal for melting or reducing the viscosity of soaps, fats, varnishes, and oil-based products.

    Base drum heaters can be used either on their own to provide heat to drum containers or alongside a drum heater jacket to increase heat up times.

    For heating and tempering via the base up to 150 °C. Suitable for steel drums of all types and manufacturers from 200 - 220 liters.

    • Carrier plate made of glass-reinforced plastic (GRP) with aluminum heating plate for optimum heat transfer.
    • Heating with fluoropolymer-insulated heating conductor, laid directly under the heating plate. Carrying handle for easy and comfortable transport.
    • Operating voltage 230 VAC (±10%); protection class IP54; protection class I.

    The post Winkler Base Drum appeared first on THPUK.

    ]]>     Temperature control:

    Various temperature controllers can be selected because of the 6+PE round plug, available either for wall mounting (L-400 series) or integrated in the connecting cable (L-300 series). Due to the precise temperature control, your substances can be protected from overheating. The modular design allows for separate purchase and replacement.

    Features and benefits 

    • Robust and lightweight base drum heater for steel drums 200 – 220 L 
    • For heating and tempering up to 150 °C 
    • Energy-efficient operation due to very good heat transfer 
    • Temperature regulation by additional temperature controller 
    • Easy transport due to integrated handle 
    • Silicone-free materials (also suitable for use in bonding and painting technology

    The post Winkler Base Drum appeared first on THPUK.

    ]]>         Thermostats https://traceheatingproducts.co.uk/product/thermostats-10/ Mon, 09 Dec 2019 12:15:31 +0000 https://traceheatingproducts.co.uk/?post_type=product&p=720 THR Heat Trace / Freeze Protection Thermostats - THR Remote Mount for Heat Trace (Bulb & Capillary)
    22 Amp Resistive Switch
    Single and Dual Output Models
    ± 1% Setpoint Repeatability
    Fast Response for Protection of Valves and Piping
    NEMA 4X, 7 and 9 Enclosures
    Third-party certifications: UL Listed, CSA, ATEX

    The post Thermostats appeared first on THPUK.

    ]]>     THR: NEMA 4X Line or Pipe Sensing
    Maintaining proper viscosity and flow is critical in heat trace or freeze protection applications. The THR remote mount thermostats utilize a stainless steel bulb and capillary design to accurately sense temperature at key points along a pipe. The THL direct mount thermostats feature liquid-filled thermal assemblies and sense air temperatures from 15 to 140˚F. Both models are epoxy coated to seal from moisture and contaminants in compliance with NEMA 4X requirements. NEMA 7 stats TXR and TXL are designed for Class I, Division I and 2, Groups B, C, D, and Class 2, Division I and 2, Group E, F, G.

    The post Thermostats appeared first on THPUK.

    ]]>         Thermostats https://traceheatingproducts.co.uk/product/thermostats-9/ Mon, 09 Dec 2019 12:08:40 +0000 https://traceheatingproducts.co.uk/?post_type=product&p=718 THL Heat Trace / Freeze Protection Thermostats - THL Direct Mount for Freeze Protection (Ambient)
    22 Amp Resistive Switch
    Single and Dual Output Models
    ± 1% Setpoint Repeatability
    Fast Response for Protection of Valves and Piping
    NEMA 4X, 7 and 9 Enclosures
    Third-party certifications: UL Listed, CSA, ATEX

    The post Thermostats appeared first on THPUK.

    ]]>     THL: NEMA 4X Ambient Air Sensing Maintaining proper viscosity and flow is critical in heat trace or freeze protection applications. The THR remote mount thermostats utilize a stainless steel bulb and capillary design to accurately sense temperature at key points along a pipe. The THL direct mount thermostats feature liquid-filled thermal assemblies and sense air temperatures from 15 to 140˚F. Both models are epoxy coated to seal from moisture and contaminants in compliance with NEMA 4X requirements. NEMA 7 stats TXR and TXL are designed for Class I, Division I and 2, Groups B, C, D, and Class 2, Division I and 2, Group E, F, G.

    The post Thermostats appeared first on THPUK.

    ]]>         Thermostats https://traceheatingproducts.co.uk/product/thermostats-8/ Mon, 09 Dec 2019 11:53:56 +0000 https://traceheatingproducts.co.uk/?post_type=product&p=717 RTAS & RTAS-EP Ambient Sensing Integrated Temperature Controls Line or Ambient Sensing Thermostats
    ElectroMechanical Control
    Rugged, Corrosion Resistant Construction
    NEMA 4X Design with Corrosion and Weather Resistant Ryton® Construction
    Ambient Sensing:
    - 120 - 480 Vac
    - 0 - 225°F Temp. Rating
    - 9/16"" OD x 4"" SS Probe
    - Ordinary & Hazardous Area (Div. 2) Approvals
    Bulb & Capillary:
    - 120 - 480 Vac
    - 0 - 400°F Setpoint Range
    - 1/4"" OD x 7-1/4"" SS Bulb and 3 Ft. Capillary
    - Ordinary & Hazardous Area (Div. 2) Approvals
    UL, CSA, and FM Approved

    The post Thermostats appeared first on THPUK.

    ]]>     RTAS is an ambient-sensing thermostat which is generally used for freeze protection in ordinary (non-hazardous) areas. The thermostat is mounted through the end of the oblique sided enclosure lid. In fact, because there is so much room in this model, multiple heating cables can be terminated. The stainless steel sheathed, inverted bellows probe provides good sensitivity, resulting in more accurate control. RTAS-EP is a modified version of the RTAS which utilizes a hermetically sealed switch. Since this switch has no arcing contacts, it can be used in Division 2 Hazardous Areas.

    The post Thermostats appeared first on THPUK.

    ]]>         Thermostats https://traceheatingproducts.co.uk/product/thermostats-7/ Mon, 09 Dec 2019 11:47:18 +0000 https://traceheatingproducts.co.uk/?post_type=product&p=715 RTAS & RTAS-EP Ambient Sensing Integrated Temperature Controls Line or Ambient Sensing Thermostats
    ElectroMechanical Control
    Rugged, Corrosion Resistant Construction
    NEMA 4X Design with Corrosion and Weather Resistant Ryton® Construction
    Ambient Sensing:
    - 120 - 480 Vac
    - 0 - 225°F Temp. Rating
    - 9/16"" OD x 4"" SS Probe
    - Ordinary & Hazardous Area (Div. 2) Approvals
    Bulb & Capillary:
    - 120 - 480 Vac
    - 0 - 400°F Setpoint Range
    - 1/4"" OD x 7-1/4"" SS Bulb and 3 Ft. Capillary
    - Ordinary & Hazardous Area (Div. 2) Approvals
    UL, CSA, and FM Approved

    The post Thermostats appeared first on THPUK.

    ]]>     RTAS is an ambient-sensing thermostat which is generally used for freeze protection in ordinary (non-hazardous) areas. The thermostat is mounted through the end of the oblique sided enclosure lid. In fact, because there is so much room in this model, multiple heating cables can be terminated. The stainless steel sheathed, inverted bellows probe provides good sensitivity, resulting in more accurate control. RTAS-EP is a modified version of the RTAS which utilizes a hermetically sealed switch. Since this switch has no arcing contacts, it can be used in Division 2 Hazardous Areas.

    The post Thermostats appeared first on THPUK.

    ]]>         Thermostats https://traceheatingproducts.co.uk/product/thermostats-6/ Mon, 09 Dec 2019 11:43:26 +0000 https://traceheatingproducts.co.uk/?post_type=product&p=711 PIT Non-Indicating Temperature Controllers Compact Size
    Explosion Resistant and Raintight Applications
    0 - 150°F and 100 - 250°F Temperature Range
    Single Phase, 120 - 277 Vac
    Bulb & Capillary
    UL Listed

    The post Thermostats appeared first on THPUK.

    ]]>     For a variety of process applications requiring rain-tight or explosion-resistant enclosure, PIT controllers may be used in pipe tracing and snow melting applications with electric heating cable.

    The post Thermostats appeared first on THPUK.

    ]]>         Thermostats https://traceheatingproducts.co.uk/product/thermostats-5/ Mon, 09 Dec 2019 11:36:48 +0000 https://traceheatingproducts.co.uk/?post_type=product&p=706 Maintaining proper viscosity and flow is critical in heat trace or freeze protection applications. The E100 remote mount thermostats utilize a stainless steel bulb and capillary design to accurately sense temperature at key points along a pipe. The B100 direct mount thermostats feature liquid-filled thermal assemblies and sense air temperatures from 15 to 140°F. Both models are epoxy coated to seal from moisture and contaminants in compliance with NEMA 4X requirements. NEMA 7 stats E121/122/122P and B121 are designed for Class I, Division I and 2, Groups B, C, D, and Class 2, Division I and 2, Group E, F, G. Product Specifications many be found in the catalog page. WARNING: Hazard of Fire. These devices function as temperature controls only. Because they do not fail-safe, an approved temperature and/or pressure safety control must be used for safe operation.

    The post Thermostats appeared first on THPUK.

    ]]>     “B100 & E100 Heat Trace/ Freeze Protection Thermostats B100 Direct Mount for Freeze Protection (Ambient)
    E100 Remote Mount for Heat Trace (Bulb & Capillary)
    22 Amp Resistive Switch
    Single and Dual Output Models
    ±1% Setpoint Repeatability
    Fast Response for Protection of Valves and Piping
    NEMA 4X, 7 and 9 Enclosures
    Third-party certifications: UL Listed, CSA, FM (models E121/122, B121 only) “

    The post Thermostats appeared first on THPUK.

    ]]>         Termination Kit https://traceheatingproducts.co.uk/product/termination-kit/ Mon, 09 Dec 2019 11:10:24 +0000 https://traceheatingproducts.co.uk/?post_type=product&p=703 Heatshrink End Seal & Termination Kit

    The post Termination Kit appeared first on THPUK.

    ]]>     “Kit contains various lengths of adhesive lined heat shrink with an M20 cable gland and grommet for Trace heating Cable.
    Contents:
    – 2 x 3-1 x 140mm Black Heatshrink
    1 x 6-4 x 140mm Green/yellow Heatshrink 1 x 12-4 x 20mm Black Heatshrink
    1 x 12-4 x 40mm Black Heatshrink 1 x 16-4 x 100mm Black Heatshrink
    1 x M20 Cable Gland & Seal for Heat Trace Cable”

    The post Termination Kit appeared first on THPUK.

    ]]>         Junction Box https://traceheatingproducts.co.uk/product/junction-box/ Fri, 06 Dec 2019 22:23:23 +0000 https://traceheatingproducts.co.uk/?post_type=product&p=700 Features and Benefits
    • ABS enclosure
    • 125 mm x 125 mm x 75 mm
    • IP66 rated
    • Slotted DIN rail x 1
    • Terminal block rated to 16 A
    • 1 in 3 out

    The post Junction Box appeared first on THPUK.

    ]]>     THP trace heating junction box measures 125 x 125 x 75mm and has ABS construction. The IP66 rated device provides superior safety and has terminal block rated for 16 A.

    The post Junction Box appeared first on THPUK.

    ]]>